PING G410 LST Driver

This high-MOI model is engineered to produce low, stable spin with the shot-shaping control provided by the G410 driver family’s innovative movable-weight technology. The compact, multi-material 450cc head combines a fast, forged T9S+ face, improved aerodynamics, and a MOI 3% higher than the G400 LST. Trajectory Tuning 2.0 expands your loft and lie adjustability utilizing a patented eight-setting, lightweight hosel.

TECHNOLOGY

Low-Spin Design

A movable high-density tungsten back weight shifts the CG location in each direction from neutral to influence right or left shot direction. The CG position is slightly forward of the G410 Plus and SFT models in all three positions (Draw, Neutral, Fade), leading to spin reduction of approximately 200 to 400 rpm, depending on shaft and a golfer’s launch conditions.

Movable Weight

The G410 LST shares the movable-weight technology introduced in the G410 Plus model, enabling you to position the center of gravity for controlling your ball flight, putting tour-level fitting in your hands. Weight positioned on the extreme boundary increases MOI to elevate ball speed and forgiveness.

Faster Profile

LST’s profile is smaller, more rounded and pear shaped to promote clubhead speed. Its “Tour Square” face sits slightly open and the score-line pattern frames the impact area to aid in alignment. The creased crown design has stiffening properties and provides a clean and powerful look at address.

Aerodynamic Shape

The LST is engineered with a smaller profile that is shorter front to back and heel to toe. Aggressively shaped, more-efficient Turbulator Technology atop the Ti 8-1-1 crown accentuates the head’s aerodynamics and increase clubhead speed for generating distance.

High-Speed Face

To accelerate ball speed for distance, the T9S+ precision-machined forged face undergoes a patented heat-treatment process, creating a thin, hot impact area for maximum flexing. A rougher face texture helps reduce spin.

Internal Dragonfly Technology

Patented Dragonfly Technology on the inside of the 450cc head creates an ultra-thin crown structure, saving weight, which is moved to the extreme boundary of the clubhead to increase the MOI by 3% (compared to the G400 LST) for added ball speed and forgiveness.

Trajectory Tuning Chart

Trajectory Tuning 2.0 in the G410 drivers utilizes a lightweight, aerodynamic hosel sleeve that provides eight positions for influencing ball flight through loft (±1.5°) and lie adjustments, including up to 3° flatter than standard.

Alta J CB Red

The next generation of PING’s proprietary counter-balanced shaft is lightweight and high-launching while offering more stability and a consistent feel. An eight-gram counterweight in the grip end helps shift the CG higher, allowing for an increase in energy transfer and momentum, resulting in more ball speed and greater forgiveness.

Shaft-Fitting Options

The high-performance PING Tour 65 & 75 (lower launch, low spin, stable feel), Project X EvenFlow Black 75 (low launch, low spin) and Mitsubishi Tensei CK Orange 60 (mid launch, low spin) are available at no upcharge and ensure a shaft-fitting option to match the launch conditions of all golfers.

LOFT LOFT ADJUSTABILITY LENGTH AVG LIE ANGLE HEAD WEIGHT HEAD SIZE SWING WEIGHT
9.5°
±1.5° 45 3/4″
57.00°
 208.0g
450cc
D4
 10.5° ±1.5°  45 3/4″  57.00°  208.0g  450cc  D4
  • These are design specifications that may vary due to manufacturing tolerances.
  • Standard length is based on the Alta J CB Red shaft.
  • Standard length with PING Tour 65 & 75, EvenFlow Black and Tensei CK Orange shafts is 45 ¼”.
  • Actual headweight will vary based on shaft, length and target swingweight.
  • Lie angle is an average of the five adjustable loft positions indicated on the hosel.
  • Available in left- and right-handed models.
SHAFT FLEX WEIGHT LAUNCH ANGLE
PING Alta J CB Red Soft Regular 56g High
Regular 59g Mid High
Stiff 63g Mid
X-Stiff 66g Mid
PING Tour 65 Regular 58g Mid
Stiff 62g Low Mid
X-Stiff 67g Low
PING Tour 75 Regular 68g Mid
Stiff 75g Low Mid
X-Stiff 80g Low
Project X EvenFlow Black 75 5.5 72g Low Mid
6.0 73g Low
6.5 78g Low
Mitsubishi Tensei CK 60 Orange Regular 61g High
Stiff 63g Mid High
X-Stiff 65g Mid
  • The default standard length with the PING Tour 65 shaft is 45.25”
  • The PING Tour 75 shaft is tip-trimmed 1″ – default standard length is 45.25”
  • The default standard length with the Project X EvenFlow shaft is 45.25″
  • The default standard length with the Mitsubishi Tensei shaft is 45.25″
  • The default standard length with the PING Alta CB Red 55 shaft is 45.75″

To get the most distance from your driver, you must optimize the launch angle and spin rate of the ball by selecting the proper loft and shaft flex for your swing speed. Generally, golfers with slower swing speeds require more-lofted drivers and more-flexible shafts to achieve the proper launch conditions. Conversely, golfers with faster swing speeds generally require lower-lofted drivers and firmer shafts.

We recommend that you get fit for the shaft that allows you to play your best golf. Whether that’s a softer, lighter shaft with a higher launch or a heavier, stiffer shaft with a lower trajectory, a PING Certified Club Fitter can help you find the shaft that brings consistency to your game.

GRIP SIZE | COLOR CODE DESCRIPTION
Golf Pride 360 Tour Velvet
The Golf Pride Tour Velvet features a state-of-the-art rubber-blend compound with a non-slip surface pattern for maximum playability and confidence. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.
Golf Pride 360 Tour Velvet Cord
The Golf Pride Tour Velvet Cord features a state-of-the-art rubber-blend compound with a non-slip surface pattern and embedded cotton twill fibers for maximum playability and confidence in all weather conditions. The scientifically designed plus-sign texture pulls moisture away from surface to allow for consistent traction.
Arccos Smart Grip The Arccos Smart Grip is engineered with an embedded sensor to automatically record and analyze every shot taken during a round of golf when paired with the Arccos Caddie app. It is available exclusively in the Golf Pride 360 Tour Velvet white and aqua sizes installed on custom orders for PING metal woods, irons and wedges.

PING offers a variety of grip sizes and styles to fit different hand sizes and texture preferences. Since grip size influences your wrist action, and therefore the direction of your shots, it is commonly used by fitters to affect ball flight.

PING color-coded grips are available in six different diameters, and can be further customized with grip tape according to your needs. Once the neutral grip color code has been determined based on hand measurements, golfers may consider smaller diameter grips to help control fades and slices, or larger diameter grips to help control draws and hooks.

Interested in the G410 LST Driver?

PING offers the most time-tested and precise custom-fitting process in golf,
one proven to generate the optimal ball flights and consistency you need to shoot lower scores.